8021Q

From RackTables Wiki
Revision as of 13:05, 18 May 2010 by Infrastation (talk | contribs) (Created page with '= 802.1Q VLAN management in RackTables = == known limitations == * port naming is fixed and cannot be changed * importing configuration for a port, which has VLANs 1~4094 allowe…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

802.1Q VLAN management in RackTables

known limitations

  • port naming is fixed and cannot be changed
  • importing configuration for a port, which has VLANs 1~4094 allowed, is very slow
  • for uplink-downlink reverb feature to work, both ports must have correct markup, have respective records on the Ports tab, and these records must be linked
  • there is no support for configuration templates like those in LiveVLANs
  • VLAN1 cannot be used on uplink or downlink ports
  • VLAN domains require a special setup procedure to work properly
  • unbinding of 802.1Q order hides existing 802.1Q ports config, blocking object deletion
  • not all hardware supports trunk ports w/o allowed VLANs, and this is not handled by RackTables
  • ExtemeOS requires a special VLAN naming scheme