Difference between revisions of "8021Q"

From RackTables Wiki
Jump to navigation Jump to search
(add IOS and XOS setup limitations)
Line 15: Line 15:
 
* VRP's "hybrid untagged VLANs" (which are not to be confused with "native" VLAN) break normal management until they are "undone"
 
* VRP's "hybrid untagged VLANs" (which are not to be confused with "native" VLAN) break normal management until they are "undone"
  
== setup ==
+
==gateway setup==
 +
RackTables uses a special component named "deviceconfig" to deliver configuration from and to managed switches. This component is a set of executable scripts located in <tt>gateways/deviceconfig</tt> directory.
 +
 
 +
== vendor-specific setup ==
 
===IOS===
 
===IOS===
Every port, which is intended to perform switching, must have "switchport mode" explicitly set in its "interface" section.
+
* Every port, which is intended to perform switching, must have "switchport mode" explicitly set in its "interface" section.
 +
* VTP mode must be set to "transparent".
 
===XOS===
 
===XOS===
Every VLAN besides "Default" and "Mgmt" (that is, any VLAN created by the user) must be named "VLANx", where x is VLAN tag ID. For example, "VLAN2", "VLAN123", "VLAN4000".
+
* Every VLAN besides "Default" and "Mgmt" (that is, any VLAN created by the user) must be named "VLANx", where x is VLAN tag ID. For example, "VLAN2", "VLAN123", "VLAN4000".

Revision as of 22:30, 12 June 2010

802.1Q VLAN management in RackTables

known limitations

  • port naming is fixed and cannot be changed
  • importing configuration for a port, which has VLANs 1~4094 allowed, is very slow
  • for uplink-downlink reverb feature to work, both ports must have correct markup, have respective records on the Ports tab, and these records must be linked
  • there is no support for configuration templates like those in LiveVLANs
  • VLAN1 cannot be used on uplink or downlink ports
  • VLAN domains require a special setup procedure to work properly
  • unbinding of 802.1Q order hides existing 802.1Q ports config, blocking object deletion
  • not all hardware supports trunk ports w/o allowed VLANs, and this is not handled by RackTables
  • ExtemeOS requires a special VLAN naming scheme
  • there is no user interface for the "disabled" deploy queue
  • "max VLANs per switch" option of VLAN switch template is stored, but always ignored
  • VRP's "hybrid untagged VLANs" (which are not to be confused with "native" VLAN) break normal management until they are "undone"

gateway setup

RackTables uses a special component named "deviceconfig" to deliver configuration from and to managed switches. This component is a set of executable scripts located in gateways/deviceconfig directory.

vendor-specific setup

IOS

  • Every port, which is intended to perform switching, must have "switchport mode" explicitly set in its "interface" section.
  • VTP mode must be set to "transparent".

XOS

  • Every VLAN besides "Default" and "Mgmt" (that is, any VLAN created by the user) must be named "VLANx", where x is VLAN tag ID. For example, "VLAN2", "VLAN123", "VLAN4000".