8021Q
Revision as of 12:05, 18 May 2010 by Infrastation (talk | contribs) (Created page with '= 802.1Q VLAN management in RackTables = == known limitations == * port naming is fixed and cannot be changed * importing configuration for a port, which has VLANs 1~4094 allowe…')
802.1Q VLAN management in RackTables
known limitations
- port naming is fixed and cannot be changed
- importing configuration for a port, which has VLANs 1~4094 allowed, is very slow
- for uplink-downlink reverb feature to work, both ports must have correct markup, have respective records on the Ports tab, and these records must be linked
- there is no support for configuration templates like those in LiveVLANs
- VLAN1 cannot be used on uplink or downlink ports
- VLAN domains require a special setup procedure to work properly
- unbinding of 802.1Q order hides existing 802.1Q ports config, blocking object deletion
- not all hardware supports trunk ports w/o allowed VLANs, and this is not handled by RackTables
- ExtemeOS requires a special VLAN naming scheme
