Revision as of 12:03, 20 May 2010

802.1Q VLAN management in RackTables

port naming is fixed and cannot be changed
importing configuration for a port, which has VLANs 1~4094 allowed, is very slow
for uplink-downlink reverb feature to work, both ports must have correct markup, have respective records on the Ports tab, and these records must be linked
there is no support for configuration templates like those in LiveVLANs
VLAN1 cannot be used on uplink or downlink ports
VLAN domains require a special setup procedure to work properly
unbinding of 802.1Q order hides existing 802.1Q ports config, blocking object deletion
not all hardware supports trunk ports w/o allowed VLANs, and this is not handled by RackTables
ExtemeOS requires a special VLAN naming scheme
there is no user interface for the "disabled" deploy queue
when only one VLAN is permitted for an access port by VST, '802.1Q ports' form still displays a SELECT for that port with the only option 'no change'
"max VLANs per switch" option of VLAN switch template is stored, but always ignored

@@ Line 13: / Line 13: @@
 * there is no user interface for the "disabled" deploy queue
 * when only one VLAN is permitted for an access port by VST, '802.1Q ports' form still displays a SELECT for that port with the only option 'no change'
+* "max VLANs per switch" option of VLAN switch template is stored, but always ignored